Pacemaker Portabel DJ-enhet

Vi är många som drömmer om att bli DJ:s... men fram tills nu har det varit dyrt, klumpigt och omständligt. Med Pacemakern kan du DJ:a överallt och den går att bära med sig... i fickan!

Vår variant är på 60gb och vi rekommenderar att du kikar på bilderna och filmerna och läser på för att få en bättre bild av detta mästerverk innan köp.

Officiella sidan www.pacemaker.net

Mixing functionality

Dynamic beat detection – 0.1 BPM precision
Record mixes straight to the Pacemaker on the fly.
Cue – auto-cue at track start, and set cue point.
Change Pitch – alter speed and key of track ± 100%
Bend pitch – momentarily alter speed of track.
Crossfade – set the line out and/or phones blend of the two channels.
Loop – set loop, split loop from end-point, split loop from in-point, exit loop, re-enter loop
Filter effects – single parameter: hi-cut/lo-cut, two-parameter: roll, echo, reverb, crush, wah, delay and trans
Kill All – reset and relaunch audio effects.
EQ – 3-band equalizer; treble, mid and bass frequencies -26 to +6 dB
Normalized sound – globally normalize all tracks’ volumes
Gain – pre-amplification volume -26 to +6 dB
Reverse play

P-switch

Press upwards to access features like pitch, looping, filters, effects and reversed play, through the alternate function of all input areas.
Press downwards for headphones control, as the crossfader switches to control the channel blend in the headphones, and the headphones volume is adjustable on the touchpad.

Display

TFT display
262.000 colours
166 ppi screen resolution

Rewind and forward

When pressing the P-switch, the rewind button sets the in-point of a loop, and the forward button the end-point.
To adjust loop in and end-points, press the P-switch upwards and either of the directional buttons, then adjust the desired point on the touchpad.

Channel 1 and Channel 2

Press left button to control channel 1, press right button to control channel 2. Full mixing functionality is available for both channels independently.
Pressing the P-switch upwards allows for toggling between time played and time left indication in the display.

Crossfader

Set at maximum left, channel 1 is alone in line out, set at maximum right, only channel 2 is in line out, and set in the middle, both channels are at the same line out level. Any variations hereof are of course possible blend options.
Press the P-switch downwards and the crossfader switches to control the channel blend in the headphones.

Play/pause

The play button behaves like on any other audio player, but when in Mix Mode, the pause is ‘stuttering’, allowing you to search and find the appropriate place to set the cue point.
When pressing the P-switch upwards, the play button reverses the play direction.

Cue

The Cue button sets the starting point for the track and can also be used to create effects. When pressing the P-switch upwards, the Cue button enables exiting and re-entering a loop.

Touchpad

The touchpad allows you to bend a track, change EQ values and gain levels.
When pressing the P-switch upwards, the touchpad allows for controlling and setting pitch values, filter parameters and audio effect levels.
When pressing the P-switch downwards, the touchpad allows for controlling the headphones volume.
The touchpad is also used to navigate the track library and the device settings.

Settings